TRAPP TRP 300, Instruction Manual

Page: 48 / 60

To operate with green products
(foliage):
✔
Remove the sealing cover (1).
✔
Remove the green crop feeder cover (4).
✔
Place the flat strainer (2), as the material will
exit through the upper part of the shredder.
✔
The green products are placed into the
green crop feeder (3), and then forwarded to
be processed. The end product leaves the
shredder through the upper part.
✔
In models TRP 40, TRF 60 and TRF 70, the
processed material leaves through the lower
part.
4
3
2
1
Attention!
The motor may burn due to overload
if an excessive amount of material is
introduced.
Assembly of Grain Feeder
TRF 60 Model:
✔
Place the grain feeder (1) over the green
crop feeder (2), secure it with screw (3),
washer (4) and tighten with nut (5) through
the internal part of the green crop feeder (2).
ENGLISH
46