Documentation
Chapter 1
Trapeze Mobility Point Installation Guide
Version 2.1
2
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
The Trapeze Networks Mobility System consists of the following components:
●
RingMaster tool suite
—A full-featured graphical user interface (GUI)
application for planning, configuring, deploying, and managing a WLAN and
its users
●
One or more Mobility Exchange™ (MX™) switches
—Distributed,
intelligent machines for managing user connectivity, connecting and
powering Mobility Point
(MP) access points, and connecting the WLAN to
the wired network backbone
●
Multiple Mobility Point™ (MP™) access points
—Wireless access points
(APs) that transmit and receive radio frequency (RF) signals to and from
wireless users and connect them to an MX switch
●
Mobility System Software™ (MSS™)
—The operating system that runs all
MX switches and MP access points in a WLAN, and is accessible through a
command-line interface (CLI), the Web View interface, or the RingMaster
GUI
Documentation
Consult the following documents to plan, install, configure, and manage a Trapeze
Networks Mobility System.
Planning, Configuration, and Deployment
Trapeze RingMaster Administrator’s Guide
. Instructions for planning,
configuring, deploying, and managing the entire WLAN with the RingMaster tool
suite. Read this guide to learn how to create a network plan and a configuration
for network deployment.
Installation
●
Trapeze Mobility Exchange Installation and Basic Configuration Guide
.
Instructions and specifications for installing an MX switch in a Trapeze
Mobility System WLAN, and basic instructions for deploying a secure IEEE
802.11 wireless service
