Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Trapeze Mobility Point Installation Guide
Version 2.1
46
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
c
Turn over the universal mounting bracket, then align the bracket over the
cable ports and the four mounting posts as shown in Figure 34.
Figure 34. Step 1c—Turning Over the Bracket
d
Once the bracket is fully seated, lock the bracket onto the MP access point
by inserting the 3-mm or 1/8-inch screwdriver into the
Lock
hole on the
access point as shown in Figure 35.
Figure 35. Step 1d—Locking the Bracket
2
Attach the three rubber adhesive feet onto the universal mounting bracket, in
the three location circles, as shown in Figure 36.
840-9502-0061
840-9502-0062
Lock