This document is intended for Public Distribution 19473 Fraser Way,
Pitt Meadowse, B.C. Canada V3Y 2V4
Phone (604) 460-6002 Fax (604) 460-6005
8
www.tranzeo.com
12/12/2005
Q
UICK
S
TART
G
UIDE
– TR-CPQ
Step 8
Attaching the Mounting Bracket
Grounding the Antenna
Using a #6 Green grounding wire, connect the Grounding Lug on the radio to a proper ground. See
APPENDIX A Lighting Information for more information.
Place the Ethernet boot over the 4 Screw Posts.
The screws should just barely clear the tightening
bracket. Apply 4 Keep nuts to the screw posts
and tighten until the gasket makes full contact
with the Ethernet boot. Do not over tighten.
As shown below, the U-Bolt is designed to mount
around a pole. Tighten bolts sufficiently to
prevent any movement.
Down or up tilt can be adjusted by swinging the
unit before tightening the U-Bolt.
