222
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Appendix J
J-2
TR-5A Series
Tranzeo Wireless Technologies
Example usage:
1.
Configure typical CPE parameters for your network in an operational CPE .
2.
Save the configuration and store it as a generic name.
3.
Open the same configuration, and edit the parameters that will be different
such as
a.
IP address
b.
Name
c.
Passwords
4.
Save the edited file as <MAC_of_unconfigured_CPE>.cfg.
You can then load this configuration file in one of two ways:
1) Import it using the Configuration Settings screen
2) Use a TFTP server
Importing the modified text from the HTTP interface of a defaulted CPE is
the easiest method for a single radio:
a) Login to radio
b) Change login password
c) Import configuration file
Applying the configuration file from a TFTP server (Static IP Client):
a) Login to radio
b) Change login password
c) On Configuration Settings page:
i.
Check “Enable TFTP Auto
-
Config”
ii. Specify IP address of TFTP server
iii. Specify filename of configuration file. The file must be in the correct
location for the TFTP server. Consult the TFTP server’s
documentation for information about how to configure the TFTP
server.
iv.
Click “Apply & Reboot”
Applying the configuration file from a TFTP server (DHCP IP client):
a) Setup a DHCP server on the same network segment as the wired side of
radio
b) Login to radio
c) Change login password
d) On network Configuration page, change IP mode to DHCP client and apply
e) On Configuration Settings page:
i.
Check “Enable TFTP Auto
-
Config”
