11
Setting Up-Remote Control Feature
Setting Up-Remote Control Feature
Setting Up-Remote Control Feature
Setting Up-Remote Control Feature
Setting Up-Remote Control Feature
This product gives you the ability to control audio/video components using your existing remote
control device. The infrared (IR) signal emitted by your remote control is converted to a radio frequency
(RF) signal at the receiver. It is then sent to the transmitter, where the RF signal is converted back to
the original IR signal and used to control the audio/video source through the IR extender mouse.
To use the IR extender mouse, follow the steps below.
Plug the IR extender mouse into the jack located on the side of the transmitter.
Point the IR extender mouse to the IR sensor on the audio/vido source component.
Position the receiver so that your remote control signal can strike the IR window on the front of
the unit.
To use your remote control, point it at the front of the receiver and operate it as you normally
would.
1
3
4
2
