Last Number Redial
Description:
Last Number Redial allows you to automatically re-
call the last outside number that you dialed from your
station.
1. Place an outside telephone call.
2. Hang Up.
3. Lift Handset.
4. Dial [7], [4]. The system will access an outside telephone line
and automatically dial the number that you manually dialed in step
1 above.
Note: The status of the original call is not important for Last Number
Redial. It does not matter whether the call is answered,
abandoned, busy, or does not answer. The call is stored
automatically as it is dialed, so it is available to you no matter
what was the outcome of the original call.
Message Waiting
Description:
Message Waiting may be invoked on a station if it is
busy or does not answer.
1. Lift Handset .
2. Dial a station.
3a. If the station is busy, you will hear busy tone. Press [6] to leave
a message. After you have set the message, dial tone will return
to indicate that you successfully left a message.
3b. If the station does not answer, you will continue to hear ringing
tone. Press [6] to leave a message. After you have set the
message dial tone will return.
4. If the station where you left the message is a TDS digital set, the
button will flash, indicating a message. If the station where you
left the message is another single line telephone, it will ring
periodically or their message waiting lamp will flash, indicating a
message is waiting. If the station is answered while it is ringing
during a message ring cycle, the station that left the message will
ring.
Answering a message:
If your telephone periodically rings, you have a message waiting.
If you answer your station while it is ringing during a message
ring cycle, you will automatically be routed to the station that left
the message. If your message waiting light is on or you have a
special message waiting tone, lift the handset and dial 76.
13
Summary of Contents for TDS 600 Series
Page 1: ...TDS 600 Series Single Line Telephone User Guide...
Page 4: ......
