2
www.transtel.co
a. Establish a call to party B, and put it on Hold.
b. Establish a call to party C; now the caller and party C are in a
conversation, press
[CONF]
key to initial 3-way conference.
7. SAVE
When IP-Phone is idle, press this [SAVE] key, the LCD will show IP address and
MAC.
8. PRG
If programming can be finished on phone, it is no need to go through the WEB
programming.
Please refer to
12. PRG by Manual
on Page 18 for detailed information.
9. VOL+ (Volume Up)
It can adjust Speaker, Handset, and Ring tone volume.
10. MSG (Programmable 76)
When MSG LED is on, press this
[MSG]
key to call back, who does MSG will be
rung.
11. FWD (Call Forward feature only works on VP)
There are three status for this key, AF= All Forward, BF= Busy Forward, NF=No
Answer Forward.
12. VOL- (Volume Down)
1~8 level volume adjustment, when the phone restarts it will change to default
setting, default at
WEB System Parameters\Volume setting
.
13. MUTE
When IP-Phone is idle, press the
[MUTE]
key, and this IP-Phone is set at
“Auto
Answer
” status.
When on a call, press the
[MUTE]
key, this phone voice will not be sent out.
14. CLI
a. Check incoming calls, press
[VOL+]
or
[VOL-]
to check call history, press
redial to dial out.
b. Check dialed number, press
[VOL+]
or
[VOL-]
to check call history, press
redial to dial out.
c.
Erase Records
15. Redial
When phone is idle, redial the previously dialed number.
16. TRF (DTMF set SIP INFO and ISU Hold)
During a VoIP call, this key offers the
“Transfer” function.
Two ways to transfer a call:
a. TRF Method
a1. Extension A calls extension B. After B answers, A presses
“HOLD” to
