BLUE TOOTH HEADSETS
The TransTel DK2-DB Blue Tooth interface will integrate
with several brands of headsets. TransTel has tested and
recommends the following headsets
Motorola HS820
Motorola HS810
Netcom GN6110
CONNECTION TO PHONE
No physical connection to the DK2-DB phone is required.
TO PAIR HEADSET WITH DK2-DB PHONE
Before Pairing:
Please ensure Blue Tooth Headset has required its first
maximum charge as recommended by the manufacturer.
•
Hold Headset with Mic Boom closed
•
Place Blue Tooth Headset into Pairing Mode by
pressing and holding down the answer key until
LED light comes on
•
Open Mic Boom. LED on Headset should remain
on
•
Press and hold down the DK2-DB “HOLD” key
until “Pairing” is displayed on phone screen
•
Release Hold Key
•
Wait until Blue Tooth Headset LED flashes rapidly
•
Phone and Headset are now Paired
Note: Please ensure you only pair one Blue Tooth Device in
the area of work at any one time
TO ACTIVATE DK2 PHONE INTO HEADSET MODE
To activate the headset mode on DK2-DB phone:
•
Press [SPK][775] to enable the headset mode, or
press the headset key.
To cancel the headset mode on DK2-DB phone:
•
Press [SPK][775] or press the headset key to cancel
the headset mode.
TO ANSWER INCOMMING CALLS
Manual Mode
To answer incoming call:
•
When DK2-DB phones rings the Blue Tooth Headset
will beep in your ear
•
To answer call press the [Answer] button on the Blue
Tooth headset.
To end the conversation of a call:
•
Press the [Answer] button again will end the call
•
The Blue Tooth Headset will beep to indicate call
ended and will automatically put DK2-DB phone to
idle state.
Note:
•
If you press [SPK] button on the DK2-DB telephone
will also end the call directly, but the Blue Tooth
Headset will be left in Auto Answer Mode”. If left in
this state the next incoming call will be answered
automatically by the Headset.
Auto Mode
Headset will be active when in this mode, please note the
battery time will be more limited when using this mode
To answer incoming call:
•
When DK2-DB phone rings the Blue Tooth Headset
will beep in your ear once
•
The Headset will then answer call
To end the conversation of a call:
•
Press the SPK key on the DK2-DB phone
Note:
•
If you press [SPK] button on the DK2-DB telephone
will also end the call directly. But the Blue Tooth
Headset will be left in Auto Answer Mode”. If left in
this state the next incoming call will be answered
automatically by the Headset.
