LCD display signal
SYMBOL
DESCRIPTION
Systolic blood pressure
High blood pressure
Diastolic blood pressure Low blood pressure
EXPLANATION
mmHg
kPa
Measurement Unit of the blood pressure
Measurement Unit of the blood pressure
Low battery
Batteries are low and need to be replaced
Current Time
Year/Month/Day, Hour/Minute
Pulse in beats per minute
Pulse display
Deflation symbol
The cuff is deflating.
Blood pressure monitor is detecting an
irregular heartbeat during measurement.
Irregular heartbeat
Blood pressure
level indicator
Indicate the blood pressure level
Memory
Indicate it is in the memory mode and
which group of memory it is.
Heartbeat
Blood pressure monitor is detecting a
heartbeat during measurement.
(1kPa=7.5mmHg)
(1mmHg=0.133kPa)
CAUTION
User 1
User 2
Start measurement and save the results for
user 1.
Start measurement and save the results for
user 2.
* Be careful to strangulation due to cables and hoses, particularly due to excessive length.
* At least 30 min required for ME equipment to warm from the minimum storage temperature between
uses until it is ready for intended use. At least 30 min required for ME equipment to cool from the
maximum storage temperature between uses until it is ready for intended use.
* This equipment needs to be installed and put into service in accordance with the information provided in
the ACCOMPANYING DOCUMENTS;
* Wireless communications equipment such as wireless home network devices, mobile phones, cordless
telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least
a distance d away from the equipment. The distance d is caculated by the MANUFACTURER from the
800 MHz to 2.5 GHz column of Table 6 of IEC 60601-1-2:2007,as appropriate.
* Please use ACCESSORIES and detachable partes specified/ authorised by MANUFACTURE.
Otherwise, it may cause damage to the unit or danger to the user/patients.
* There is no luer lock connectors are used in the construction of tubing, there is a possibility that they
might be inadvertently connected to intravascular fluid systems, allowing air to be pumped into a blood
vessel.
* Please use the device under the environment which was provided in the user manual. Otherwise, the
performance and lifetime of the device will be impacted and reduced.
6
7
INTRODUCTION
INTRODUCTION
