5
4
Initial Start-Up
Initial Start-Up
Installing and Replacing the Battery
When you use the Activity Tracker for the first time, please install the battery
(1×CR2032) first.
Remove the battery if the device is not likely to be used for some time.
The old battery is harmful to the environment, do not dispose with other daily trash.
Remove the old battery from the device and follow your local recycling guidelines.
CAUTION
Replace the batteries whenever the below happen
The red LED light blinks
The LED display does not light up
Do not dispose of battery in fire. Battery may explode or leak.
• Insert the matched screwdriver into the notch of the main unit, use it to pry the
bottom case of the Activity Tracker open.
• Install the battery by matching the correct polarity, as shown. (Always select the
authorized / specified battery : One CR2032 Lithium Battery)
• Close the bottom case. Buckle the place which the bottom case marking “12”
and the place which the top case marking “12”.
12
“12” marked in the label
of the top case
“12” marked in the
bottom case
Buckle the top case
and the bottom case
Rating : 1xCR2032,3V
Made in China
TRANSTEK
Activity T
racker
LS410-B
The bottom case
Bottom case
FCC ID:OU9LS410-B01
