Initial Start-Up
Installing and Replacing the Battery
When you use the Activity Tracker for the first time, please
install the battery (1×CR2032) first.
• Close the bottom case. Buckle the place which the bottom case marking “12”
and the place which the top case marking “12”.
• Use the matched screwdriver to open the bottom of the Activity
Tracker.
“12” marked in the label
of the top case
“12” marked in the
bottom case
Buckle the top case
and the bottom case
• Install the battery by matching the correct polarity, as shown.
(Always select the authorized / specified battery : One CR2032 Lithium Battery)
4
5
Initial Start-Up
CAUTION
Remove the battery if the device is not likely to be used for some time.
The old battery is harmful to the environment, so please disposal with other daily trash.
Remove the old battery from the device and follow your local recycling guidelines.
Do not dispose of battery in fire. Battery may explode or leak.
Replace the batteries whenever the below happen
The red LED light blinks
The LED display does not light up
