11
10
Start Measuring
Initial Start-Up
Please process the user setting before your first measurement.
(
Refer to Set Up Your Profile for more details
)
STEP 3:
The measuring results will be displayed sequentially four times:BMI, Body
Fat, Muscle Mass,Total Body Water, Bone Mass, Weight, and then turn off.
* If it fails to complete the analysis, the LCD will only display the weight data.
(
To find out the solutions, please refer to Troubleshooting for more details.
)
STEP 1:
Step on the platform barefooted.
First Measurement
When your scale is successfully paired with your smartphone and the Bluetooth is ON,
LS202-B1 will process data transmission instead.
(
Please refer to Data Transmission for more details.
)
Weight Only Operation
Your TRANSTEK Body Fat Analyzer will operate as a conventional
weight - reading scale. No special programming steps are required.
Once the scale is initialized, as previously described, you may simply step on
the scale to measure your current weight. For only weight reading.
1. Position the scale on a flat, hard
surface. Carpeted or uneven
floors may affect accuracy.
2. Step onto the scale platform
and remain still while the
scale computes your weight.
3. The scale will display your
weight value.
4. The scale will automatically
turn off after a few seconds.
Note: The weight value won’t be saved in the scale, and won’t be transmitted to the APP.
1. Press the platform centre and remove your foot.
2. “0.0” will be displayed.
3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
Initialising Your Scale
STEP2:
Stand still and the weight data will be locked with the unit stop blinking. Keep
full contact with the conductors until the LCD stop displaying moving “ ”.
