General Instructions
Initial Start-Up
Initial Start-Up
Install APP and Pair-Up
Insert the Batteries
Open the battery door in the back of the scale.
Insert the batteries (4 x 1.5V AAA) into the battery
compartment according to the polarity indications
marked inside the compartment.
* The digits “ 8888 ” will be shown on the LCD.
Close the battery door and wait until the digits “ ”
are shown on the LCD.
Transtek Body Fat Analyzer GBF-1267-F applies BIA (Bio-impedance Analysis)
technology. A small amount of weak current flows through the human body so as to detect
the bio-impedance and estimate BMI, body fat, body water, muscle mass and bone mass.
The electrical current is small and may not be felt.
This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also
possesses the characteristics of simple operation and abundant information.
The current mentioned above is less than 0.5mA. However, please be aware that anyone
with an wearable or implantable medical electronic instrument, such as a pacemaker, must
avoid using this device.
The intended use of this device is for healthy children 10-17 years old and healthy adults.
CAUTION
When the symbol “ Lo” appear, the device will power off. Then you shall replace with a new set of
batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries with the new
one.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries
and scrapped device.
If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries
before storing.
Do not mix alkaline, standard(carbon-zinc), or rechargeable(Ni-Cd, Ni-MH, etc) batteries.
WELLNESS COACH
HEALTH
Download Wellness Coach-Health mobil application.
Create your account or log in with your credentials.
Weight Scale Bluetooth
Weight Scale Wi-Fi
Nutritional Kitchen Scale
Blood Pressure Monitor
Activity Tracker
1
2
3
After creating your
account, select the Wi-Fi
Bathroom Scales to start
the pairing procedure.
Note: If you are connected
with a pre-existing
account, press the button
indicated, the “Sync My
Devices”, and then select
Wi-Fi Bathroom Scales to
start the pairing procedure.
Follow the instructions on
the mobile application.