75 rpm (an option)
1. Install the 78 rpm motor pulley and position the belt on the larger pulley size
and switch the power supply to the 45 rpm position.
2.
With your hand, lightly aid the motor by starting the platter in motion.
This will help getting the platter up to speed and keep your belt
from wearing out prematurely.
Fine tuning your speed
1.
Located on the front panel are two holes for each speed, 33 1/3 and 45.
First run your turntable for 10 to 15 minutes to allow the motor to warm up.
Then with a fine screwdriver you can finely adjust each speed independently.
Technical Specifications
Output Voltage
2 X 18 V AC two phase
Output Current (max)
0,2 amps (Konstant III 2 X0.35 amps)
Speed Correction range
+/- 5%
Max Voltage draw
30 VA (III 50 VA)
Enclosure
6 mm Aluminum
Front plate
8 mm Aluminum
Dimensions
176w X 75h X 170d mm
