Specifications
NOTE:
MONITOR functions of UL325
(01) End of Line Resistor (10K )
(02) N.C. contact (Optional)
Depending on the monitoring system used by the gate motor,
it may be necessary to use either the N.C. output or connect
the included 10K resistor to the N.O. or N.C. output.
Please refer to the gate operator manual or the gate operator
manufacturer for the preferred monitoring method.
Input Volt.
12-30 VDC/AC 60 Hz (Non Polarity)
Current consumption
100 mA
Tx LED Element
Infrared LED/Wave length 740 nm
Beam Spreading angle
5˚
Contact Capacity
30VDC/AC, 0.5A
Response Time
10 msec
Delay Time of Relay
10 msec
Sensing Range
10 meters
LED Indicators:
Red LED Off: Beam aligned / Red LED On: Beam broken
Red LED flash: Beam alignment signal weak (Re-align)
Green LED on: Beam aligned proper
Additional Function
Tamper switches
Wiring Connection
Terminal block / Cable gland (IP-55)
IP
IP-55
Environment/Storage Temp -13˚F to 140˚F / -31˚F to 176˚F
Dimension
122 (L) x 61 (W) x 62 (D) mm
Cable wires
2517 / 24AWG / 5~7 cores
Approvals
UL325-2016 & CE
1
Summary of Contents for iGAZER50LR-UL
Page 2: ......
