Transmitter Solutions iCE?Entry?100, Installation Manual

Page: 41 / 52

ICE-­‐ENTRY-­‐100
INSTALLATION MANUAL
Page 40
10.6 RECEIVE INPUT PARAMETERS (PIN)
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input parameters (IN1 – IN4):
;PIN;
10.7 RECEIVE INPUT FILTER VALUE (PID)
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input filters (ID1 – ID2):
;PID;
10.8 RECEIVE OUTPUT FILTER VALUE (POD)
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed direct output links (OD1 – OD3):
;POD;
10.9 RECEIVE DELAY BEFORE DIAL VALUE (PDD)
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Input filters (DD1 – DD2):
;PDD;
10.10 RECEIVE ACCESS TELEPHONE NUMBERS (PSL)
By sending this command to ICE-ENTRY-100 you receive SMS message with
programmed SL level:
;PSL;
10.11 RECEIVE OUTPUT PARAMETERS (POS)
By sending this command to ICE-ENTRY-100 you receive SMS message with all
currently programmed Outputs parameters (OS1 – OS2):
;POS;