background image

3000RS PRECISION RESISTANCE STANDARD 
OPERATION MANUAL 

Transmille Ltd.  

Page 2 

Guarantee and Service  

 

Transmille Ltd. guarantees this instrument to be free from defects under 
normal use and service for a period of 1 years from purchase. This guarantee 
applies only to the original purchaser and does not cover fuses, or any 
instrument which, in Transmille’s opinion, has been modified, misused or 
subjected to abnormal handling or operating conditions. 
 
Transmille’s obligation under this guarantee is limited to replacement or 
repair of an instrument which is returned to Transmille within the warranty 
period. If Transmille determines that the fault has been caused by the 
purchaser, Transmille will contact the purchaser before proceeding with any 
repair.  
 
To obtain repair under this guarantee the purchaser must send the instrument 
in its original packaging (carriage prepaid) and a description of the fault to 
Transmille at the address shown below. The instrument will be repaired at the 
factory and returned to the purchaser, carriage prepaid. 
 
Note : 
TRANSMILLE ASSUMES NO RESPONSIBILITY FOR DAMAGE IN TRANSIT 
 
THIS GUARANTEE IS THE PURCHASER’S SOLE AND EXCLUSIVE 
GUARANTEE AND IS IN LEIU OF ANY OTHER GUARANTEE, EXPRESSED OR 
IMPLIED. TRANSMILLE SHALL NOT BE LIABLE FOR ANY INCIDENTAL, 
INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS. 

 

 

Transmille Ltd. 
Unit 4, Select Business Centre 
Lodge Road 
Staplehurst 
Kent 
TN12 0QW 
United Kingdom 
 
Tel : 

+44 0 1580 890700 

Fax :  +44 0 1580 890711 
 
EMail : [email protected] 
Web :  www.transmille.com 

 

Summary of Contents for 3000RS












Reviews: