4. Installation
1. Please refer above installation diagram in selection 3 to
install your system.
2. Power on all receivers and 18 V DC power adapter.
3. If power from receivers and 18 V DC power adapter exist,
green LED on multiswitch should be turn on.
4. Any DiSEqC commands between receivers and multiswitch,
green LED will be flashing.
5. If no power from receivers, multiswitch will be turn off.
Green LED will be turn off and it means F MULTI 15 is
turned off to power-saving mode.
6. No matter how the power is, the terrestrial signal is passive
and always working.
7. Setup in receiver menu:
Please refer to the manual of your receiver to enter the settings..
• Select the satellite you wish to receive.
• Select the LNB type as Unicable LNB or Unicable Multiswitch.
• Select for the
first
receiver the following settings User ID:
0, User Band: 1210 MHz
• for the
second
receiver User ID:
1, User Band: 1420 MHz
• Start the search. After completion, save all program locations.
6
FMULTI5_Manual-en_99.indd 6
08.11.2013 12:02:18
