P a g e
|
13
CHAPTER 6
ACCESING THE DEVICE GUI
The MoCA Wi-Fi adapter features an onboard graphical user interface (GUI) that
includes user-configurable settings. Some of these settings should be accessed by
experienced network technicians only.
To configure the network settings of the adapter:
Step 1:
Make sure the device is powered on and connected to a PC using an ethernet
cable. There are four ETH ports on the device, for management any port can be used.
Step 2:
Configure your PC’s IP address to 192.168.10.x range.
Step 3:
Log in to the device using a browser by
http://192.168.10.1
,
Username: admin
Password: admin
Fig. 6-a
Summary of Contents for TL-MC84-W Series
