P a g e
|
11
Signal and NMS Cable Connection
The signal connections include the connection of input signal cable and the connection of output
signal cable.
CHAPTER 3
WEB NMS MANAGEMENT
User can only control and set the configuration in computer by connecting the device to web
NMS Port. User should ensure that the computer’s IP address is different from this device’s IP
address; otherwise, it would cause IP conflict.
3.1
LOGIN
The default IP address of this device is
192.168.0.136
.
Connect the PC (Personal Computer) and the device with a net cable and use ping command to
confirm they are on the same network segment. For instance, the PC IP address is
192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255 except
252 to avoid IP conflict).
Launch the web browser an input the device IP address in the browser’s address bar and press
Enter.
It will display the Login interface. Input the Username and Password (Both the default
Username and Password
are “admin”. And then click “Login” to start the device setting.
3.2
OPERATION
Summary:
When we confirm the login, it will display the summary interface as Figure-2 where users have
an overview of the system information.
