TNIC
20
7
Adapter Card
Fiber Optic Connector/10BaseFL Connection
The fiber optic adapter cards provides one set of transmit (TX) and
receive (RX) ST connectors to fiber optic cable.
Ensure that cable installed at transmit (TX) connector of adapter card is
installed at receive (RX) connector of device at other end of fiber cable;
ensure that cable installed at receive (RX) connector of adapter card is
installed at transmit (TX) connector of device at other end of fiber cable.
up to 2000 meters
INSTALL Automatic Card Configuration Window
The INSTALL utility detects and displays the following information in
the Automatic Card Configuration Window:
•
Card Name
•
Bus Type
•
Ethernet Address
•
DMA Channel (default)
•
IRQ Level (default)
•
Boot ROM Address
•
I/O Address
The TNIC-PCI Adapter Card values are displayed at the Automatic
Card Configuration Window.
Selecting Configure allows the system to accept proposed values and
configure card
Drivers
Configure
Main
X
Exit
?
Help
I/O Address
Automatic Card Configuration Window
Card Name
Bus Type
Ethernet Address
DMA Channel
IRQ Level
Boot ROM Address
Configure
- To Accept Proposed Values and Configure Card
Drivers
- To Select and Install Drivers
Main
- To Return to TNIC Family Installation Main Window
Selections
