TN-SFP-xxx
2
Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600—24 hours
Part Number
Duplex Fiber-Optic Port
TN-SFP-LX12
LC, 1000Base-LX, 1550 nm single mode with DMI management,
120 km (
74.6 miles)*
TN-SFP-LXl6
LC, 1000Base-LX, 1550 nm single mode with DMI management,
160km
(99.4 miles)*
TN-SFP-OC3M
LC, 100Base-FX/OC-3 1300 nm multimode
2km
(1.2 miles)*
TN-SFP-OC3S
LC, 100Base-FX/OC-3 1310 nm single mode
20km
(12.4 miles)
*
TN-SFP-OC3S3
LC, 100Base-FX/OC-3 1310 nm single mode
30km
(18.6 miles)
*
TN-SFP-OC3S8
LC, 100Base-FX/OC-3 SFP 1550 nm single mode with DMI
management, 80km
(50 miles)
*
TN-SFP-OC12M
LC, OC-12/STM-4 SFP 1300 nm multimode 1 km
(0.6 miles)
*
TN-SFP-OC12S
LC, OC-12/STM-4 SFP 1310 nm single mode 20 km
(12.4 miles)
*
TN-SFP-FC2XM
LC, FC 2x/1x/OC-48/STM-16/1000Base-SX, 850 nm multimode,
with DMI management150 m
(492 ft)
* on 62.5/125 µm fiber,
300 m
(984ft)
* on 50/125 µm fiber
TN-SFP-FC2XS2
LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single
mode with DMI management
2 km
(1.2 miles)
*
TN-SFP-FC2XS15
LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single
mode with DMI management
15 km
(9.3 miles)
*
TN-SFP-FC2XS40
LC, FC 2x/1x/OC-48/STM-16/1000Base-LX, 1310 nm single
mode with DMI management
40 km
(24.9 miles)
*
Part Number
Simplex Fiber-Optic Port
TN-SFP-BXU**
LC, 1000Base-BX, Single Fiber, 1310nm TX/1490nm RX, single
mode with DMI management, 10 km
(6.2 miles)
.
TNSFP-BXD**
LC, 1000Base-BX, Single Fiber, 1490nm TX/1310nm RX, single
mode, 10 km
(6.2 miles)
with DMI management.
TN-SFP-BXU2**
LC, 1000Base-BX, Single Fiber, 1310nm TX/1490nm RX, single
mode, 20 km
(12.4 miles)
with DMI management.
TN-SFP-BXD2**
LC, 1000Base-BX, Single Fiber, 1490nm TX/1310nm RX, single
mode, 20 km
(12.4miles)
with DMI management.
[email protected] -- Click the “Transition Now” link for a live Web chat.
3
Connect the fiber cable
to the SFP Transceiver
module as shown.
Connect the fiber cable
to the other device
(media converter,
hub, etc.)
as shown
RX
TX
RX
TX
Installation
Important: In Cisco Systems' literature, Cisco switches with SFP slots do not accept
SFP modules from other manufacturers. The Cisco switch identifies the manufacturer’s
ID along with the part number and blocks operations to the port for non-Cisco
modules. Other major SFP switch manufacturers do not indicate in their literature that
such restrictions are imposed.
Installing the SFP transceiver
To install the SFP module into a media converter, do the following:
1.
Position the module at the installation slot with the label faces up.
2.
Slide the module into the slot fully to ensure proper connection.
Installing the fiber cable
To install the fiber cable, do the following:
1.
Locate 1000Base-SX-compliant or 1000Base-LX-compliant fiber cable with
male TX to RX connectors installed at both ends.
2.
Install the fiber cable as shown below.
Part Number
Simplex Fiber-Optic Port
TN-SFP-LXB11**
LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode,
with DMI, 10km
(6.2 miles)*
TN-SFP-LXB12**
LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode,
with DMI management, 10km
(6.2 miles)*
TN-SFP-LXB21**
LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode,
with DMI management, 20km
(12.4 miles)*
TN-SFP-LXB22**
LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode,
with DMI management, 20km
(12.4 miles)*
TN-SFP-LXB41**
LC, 1000BASE-LX, 1310TX/1550RX Simplex, single mode,
with DMI management, 40km
(24.9 miles)*
TN-SFP-LXB42**
LC, 1000BASE-LX, 1550TX/1310RX Simplex, single mode,
with DMI management, 40km
(24.9 miles)*
**Install simplex or single-fiber models in pairs in the same network where one is the
local SFP and the other is the remote SFP.
*Unless otherwise indicated, the distances listed are the typical maximum cable distance.
The actual maximum cable distances are dependent upon the physical characteristics of
the network installation.
