Installation . . . . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . . . . .6
Technical Specifications . . . . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . . . . .9
Compliance Information . . . . . . . . .12
* Typical maximum cable distance. Actual
distance is dependent upon the physical
characteristics of the network.
SSDTF3027-115
75 ohm coax
100 m
(328 ft.)*
ST, 1300 nm multimode
5 km
(3.1 miles)*
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
SSDTF3011-115
75 ohm BNC coax
100 m
(328 ft.)*
ST, 850 nm multimode
2 km
(1.2 miles)*
SSDTF3012-115
75 ohm coax
100 m
(328 ft.)*
ST, 1310 nm single mode
8 km
(4.8 miles)*
SSDTF3013-115
75 ohm coax
100 m
(328 ft.)*
SC, 850 nm multimode
2 km
(1.2 miles)*
SSDTF3014-115
75 ohm coax
100 m
(328 ft.)*
SC, 1310 nm single mode
20 km
(12.4 miles)*
SSDTF3015-115
75 ohm coax
100 m
(328 ft.)*
SC, 1310 nm single mode
40 km
(24.8 miles)*
SSDTF3016-115
75 ohm coax
100 m
(328 ft.)*
SC, 1310 nm single mode
60 km
(37.3 miles)*
SSDTF3017-115
75 ohm coax
100 m
(328 ft.)*
SC, 1550 nm single mode
80 km
(49.7 miles)*
SSDTF3018-115
75 ohm coax
100 m
(328 ft.)*
MT-RJ, 1300 nm multimode
2 km
(1.2 miles)*
SSDTF3022-115
75 ohm coax
100 m
(328 ft.)*
ST, 1310 nm single mode
15 km
(9.3 miles)*
SSDTF3025-115
75 ohm coax
100 m
(328 ft.)*
MT-RJ, 1310 nm single mode
20 km
(12.4 miles)*
User’s Guide
SSDTF30xx-11x
Stand-Alone Device
•
E1 with Remote Management
•
Coax (BNC) to Fiber
Transition Networks SSDTF30xx-11x series
Devices encode and decode E1 coax copper signals
over fiber optic cable to extend the distance and
transmission reliability of high-speed E1 data traffic.
The SSDTF30xx-1xx is framing independent (as ESF vs. D4) and supports all common
line codes
(e.g., AMI, B8ZS, HDB3)
.
The SSDTF30xx-11x is designed to be installed in pairs. For example, install one
SSDTF3011-115 as the local Device and another SSDTF3011-115 as the remote Device.
