Transition Networks
SM8TAT2DPB Install Guide
13
of
23
Installing SFP Modules
You can install or remove a mini-GBIC SFP from a mini-GBIC slot without having to power off the switch.
See the Transition Networks
for more information on our line of Optical Devices.
See the specific SFP manual for information specificto your SFP module (cautions and warnings, compliance,
installing, fiber cable characteristics, connecting fiber cables, removing an SFP module, DMI / DDMI data,
etc.
Step1.
Insert the SFP module into the switch port.
Step2.
Press firmly to ensure that the module seats into the connector.
Figure 8 Installing a SFP Module into a SFP Module Slot
Connecting the Console Port
Figure 9 Connecting Console Port
Start a terminal application such as HyperTerminal on the computer. Configure with these parameters
Default Baud rate—115,200 bps
Parity—None
Stop bit—1
Data bits—8
Flow control—none
The default username is “
admin
” and password is “
admin
”.
Refer to the SM8TAT2DPB CLI Reference for command line interface (CLI) information.
