SISPM1040-382-LRT Quick Start Guide
33721 Rev. A
Page 2 of 2
Command Line Interface (CLI)
: In addition to Web-base management, the SISPM1040-382-LRT also supports CLI management. Before configuring
by RS-232 serial console, use an RJ45 to DB9-F cable to connect the switch’s RS-232 Console port to your PCs’ COM port. You can use HyperTerminal,
PuTTY, Tera Term, Telnet, or similar program. The main CLI command line controls are:
?: List, <TAB>: Complete, <ctrl+z>: Up level,
<ctrl+q>: Logout
The main CLI commands
include Enter Privileged EXEC mode (enable), Logout command line shell (logout), Ping function (ping), Logout command
line shell (quit), and Show (show).
Config mode commands
let you configure 8021x, admin, aggregator, auto-sfp, check-concurrence, defaults, dhcpserver, end, events, exit, fault-relay, igmp, interface, ip, lldp,
mac-address-table, mstp, multi-ring, multicast-filtering, multiple-ring, no, ptp, qos, reload, rings, rstp, security, sfp-monitor, smtp, snmp, sntp, syslog, system details, , and tftp.
Web Management
: The default values are IP Address:
192.168.1.77
, Subnet Mask:
255.255.255.0
, Default Gateway:
192.168.1.254
, User Name:
root
, Password:
root
.
System Login:
1.
Launch a web browser such as Internet Explorer.
2.
At the prompt http:// type the IP address of the switch and press “Enter”.
3.
At the login screen (shown right), enter thecurrent User name (
root
) and Password
(
root
).
4.
Press “Enter”; the System Information page displays (below right).
The Web GUI
lets you configure, monitor, test, and report the many available functions. The top-level Web GUI menu items are:
System Information, Front Panel, Basic Setting, DHCP Server, Port Setting, Redundancy, VLAN, SNMP, Traffic Prioritization, Multicast,
Security, Warnings, Monitor and Diagnostics, Power over Ethernet (PoE), Save Configuration, Factory Defaults, and System Reboot.
Related Information
: For Transition Networks Drivers, Firmware, Manual, etc. go to the
webpage (logon required). For Transition Networks Application Notes, Brochures,
Data Sheets, Specifications, etc. go to the
(no logon required).
Trademarks
: All trademarks and registered trademarks are the property of their respective owners.
Copyright Notice/Restriction
s: Copyright © 2013-2017 Transition Networks. All rights reserved.No part of this
work may be reproduced or used in any form or by any means (graphic, electronic or mechanical) without written permission from Transition Networks. The information contained herein is confidential property
of Transition Networks, Inc. The use, copying, transfer or disclosure of such information is prohibited except by express written agreement with Transition Networks, Inc.
Transition Networks |
10900 Red Circle Drive | Minnetonka, MN 55343 USA | tel: +1.952.941.7600 | toll free: 1.800.526.9267 | fax: 952.941.2322 |
