8
Installation
This section shows the installation procedures of the switch.
Set the Switch on a sufficiently large flat space with a power outlet nearby.
The surface where you put the Switch should be clean, smooth, level, and
sturdy. Make sure there is enough clearance around the Switch to allow
attachment of cables, power cord and air circulation.
Attaching Rubber Feet
A. Make sure mounting surface on the bottom of the Switch is grease and
dust free.
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the Switch.
These footpads will help protect the Switch from shock/vibration.
Mounting on the Wall
The switch is designed so it can mount on the wall. The bottom of the
switch has two cross hook holes for mounting the switch to a wall. Follow
the steps below for wall mounting the switch.
1. Using the screw as the following figure showed. The screws did not
include in the package. User needs to provide their own screws.
