Transition Networks
E-MCR-05 User Guide
33392 Rev. C
Page 6 of 12
Connect Power to the E-MCR-05
WARNING
: Make sure that the E-MCR-05 will not overload the circuit used to supply power. See
on page
for current and power maximums.
WARNING
: Make sure that the E-MCR-05 is properly grounded. Failure to observe this warning could result in an
electrical shock.
1.
Locate the power cord.
2.
Insert the female end of the power cord into the power supply AC power inlet shown below.
3.
Insert the other end of the power cord into the AC wall outlet.
4.
Press the power ON/OFF rocker switch to the ON position to supply power to E-MCR-05; media converter
power LEDs should turn ON.
Back Panel
