User’s Guide
CRS2F31xx-100
Slide-in-Module Media Converter
RS-232 to Fiber
Transition Networks CRS2F31xx-100
series media converters are designed to
be installed in the
PointSystem™
chassis
and connect copper RS-232 cable to
fiber-optic cable at asynchronous data
rates up to 115 kB/s.
The CRS2F31xx-100 is designed to be
installed in pairs where one is the local
media converter and the other is the
remote.
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
The
stand alone version
of the media converter is SRS2F31xx-100. For more
information, see the SRS2F31xx-100 user’s guide on-line at:
www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .6
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12
Part Number
Port One -
Copper
Port Two -
Duplex Fiber-Optic
CRS2F3111-100
RS-232
15 m (50 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
CRS2F3113-100
RS-232
15 m (50 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
CRS2F3114-100
RS-232
15 m (50 ft)*
SC, 1310 nm single mode
20 km (12.4 miles)*
CRS2F3115-100
RS-232
15 m (50 ft)*
SC, 1310 nm single mode
40 km (24.8 miles)*
