33403 Rev. E
https://www.transition.com
Page 1 of 15
User Guide
CBFTF10xx-1xx
Slide-in-Module Media Converter
•
Extend network distance up to 120 km with an SFP module
•
Convert 10/100 on copper to straight 100 on fiber
•
Half or Full-Duplex on both ports
•
Fully manageable
•
Auto-Negotiation and AutoCross™
•
Link Pass Through (LPT) and Far-End-Fault (FEF)
•
Automatic Link Restoration
•
Field Upgradeable Firmware
•
Can be used with any Point System™ Chassis
•
Bridging media converters provide conversion and integration solutions for half- and full-duplex environments
Contents
Introduction .................................................................................................................................................. 1
Ordering Information .................................................................................................................................... 2
DIP Switch and Jumper Locations ............................................................................................................. 3
Installation .................................................................................................................................................... 3
Set 6-position DIP Switch (SW2) ............................................................................................................... 4
Hardware/Software Mode Jumper (J4) .................................................................................................... 5
Install the Slide-in-Module ....................................................................................................................... 5
Install the Twisted-Pair Copper Cable ...................................................................................................... 6
Install the Fiber Cable ............................................................................................................................... 6
Operation ...................................................................................................................................................... 7
Status LEDs ............................................................................................................................................... 7
Product Features ...................................................................................................................................... 8
Cable Specifications ................................................................................................................................ 10
Technical Specifications .............................................................................................................................. 12
Troubleshooting .......................................................................................................................................... 13
Contact Us ................................................................................................................................................... 14
Compliance Information ............................................................................................................................. 14
Declaration of Conformity ...................................................................................................................... 14
CE Mark ................................................................................................................................................... 14
Record of Revisions ..................................................................................................................................... 15
Introduction
Transition Networks CBFTF10xx-10x two-port Ethernet/Fast Ethernet bridging media converter connects
10Base-T Ethernet or 100Base-TX Fast Ethernet twisted-pair copper network devices to network devices
on a 100Base-FX Fast Ethernet fiber network.
The CBFTF10xx-10x provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing
you to integrate fiber optic cabling into 10/100Base-TX copper environments. Operating at Layer 2, this
converter not only converts copper to fiber, but it also does Rate Conversion, converting 10/100 copper
to 100Base fiber.
