Transition Networks CBFTF1011-100 User Manual Download Page 9

Trademark Notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright Restrictions

© 2001-2005 Transition Networks.
All rights reserved.  No part of this work may be reproduced or used in any form or by any
means - graphic, electronic, or mechanical - without written permission from Transition
Networks.
Printed in the U.S.A.

33220.H

Contact Us

Technical Support

Technical support is available 24 hours a day .
US and Canada:

1-800-260-1312

International:

00-1-952-941-7600

Transition Now

Chat live via the Web with Transition Networks Technical Support.
Log onto 

www.transition.com

and click the 

Transition Now

link.

Web-Based Seminars

Transition Networks provides seminars via live web-based training.
Log onto 

www.transition.com

and click the 

Learning Center

link.

E-Mail

Ask a question anytime by sending an e-mail to our technical support staff.

[email protected]

Address

Transition Networks
10900 Red Circle Drive, Minnetonka, MN  55343, U.S.A.
telephone:  952-941-7600, toll free: 800-526-9267, fax: 952-941-2322

Declaration of Conformity

Name of Mfg:

Transition Networks 
10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.

Model:

CBFTF10xx-10x Series Media Converters

Part Number(s):

CBFTF1011-100, CBFTF1013-100, CBFTF1014-100, CBFTF1015-100, 
CBFTF1016-100, CBFTF1017-100, CBFTF1018-100, CBFTF1019-100,
CBFTF1029-100, CBFTF1029-101, CBFTF1029-102, CBFTF1029-103, 
CBFTF1035-100,CBFTF1039-100

Regulation:

EMC Directive 89/336/EEC

Purpose:  To declare that the CBFTF10xx-10x to which this declaration refers is in

conformity with the following standards.

CISPR 22:1993; EN 55022:1998 Class A; EN 55024:1998; FCC Part 15 Subpart B; CFR 21

subpart J; EN 61000-3-2:1995 + A14:2000; EN61000-3-3:1995 

I, the undersigned, hereby declare that the equipment specified above conforms to the above

Directive(s) and Standard(s).

January , 2008

Stephen Anderson, Vice-President of Engineering

Date

Summary of Contents for CBFTF1011-100










Reviews: