C/E-TX-SX-02 IN THE NETWORK
The C/E-TX-SX-02 media converter is designed to work effectively with
10/100 autonegotiating ports to provide reliable 10 Mbps or 100 Mbps
fiber links.
The C/E-TX-SX-02 receives and transmits network signals in either full-
duplex or half-duplex mode, depending upon the network devices to
which the media converter is attached. Fast Ethernet
™
in full-duplex
mode allows the maximum cable distances shown on these pages. Fast
Ethernet
™
in half-duplex mode requires attention to the 512-bit Rule
(See page 4).
NOTE: Both copper AND fiber connections to the C/E-TX-SX-02 must
be at the same media-speed: 10BASE-T / 10BASE-FL or 100BASE-TX /
100BASE-SX OR one or both connections must be capable of auto-
negotiation.
Network Installation
Install two C/E-TX-SX-02 series media converters in series to extend,
over fiber, the distance between two 10BASE-T or 100BASE-TX devices:
TECHNICAL SPECIFICATIONS
Standards
IEEE 802.3,
Compliant with pending TIA/EIA-785 specification
Environment
Temperature:
0-40°C (32° to 104° F )
Storage Temperature: -15° to 65°C (5° to 149° F )
Humidity
10-90%, non condensing
Altitude
0-10,000 feet
Warranty
Lifetime
DECLARATION OF CONFORMITY
Name of Mfg:
Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model:
C/E-TX-SX-02 Series Media Converters
Part Number(s):
C/E-TX-SX-02, C/E-TX-SX-02(SC)
Regulation:
EMC Directive 89/336/EEC
Purpose: To declare that the C/E-TX-SX-02 to which this declaration refers is in
conformity with the following standards.
EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992;
EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950
I, the undersigned, hereby declare that the equipment specified above conforms to the
above Directive(s) and Standard(s).
_November 1, 1999_____
Stephen Anderson, Vice-President of Engineering
Date
UTP/STP
Fiber
up to 300 meters - multimode
up to 100 meters
up to 100 meters
