* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network.
The chassis version of the media
converter is C4TEF10xx-10x. For more
information, see the user’s guide on-line
at: www.transition.com.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . .10
Cable Specifications . . . . . . . . . .12
Technical Specifications . . . . . . .14
Troubleshooting . . . . . . . . . . . . .15
Compliance Information . . . . . . .19
User’s Guide
AS4TEF10xx-10x
Stand-Alone Media Converter
• RS-232 to Fiber
• (4) T1/E1 to Fiber
The AS4TEF10xx-10x media converter can
extend signals from an RS-232 data port and
up to four (4) T1/E1 network ports over fiber.
The RS-232 and T1/E1 interfaces are independent of each other and the signals
from these ports can be sent over the fiber interface simultaneously.
The AS4TEF10xx-10x is designed to be installed in pairs. For example, install one
S4TEF1011-100 as the local media converter and another S4TEF1011-100 as the
remote media converter.
All S4TEF10xx-10x models have the following copper connectors:
The various fiber connectors are available on separate models. Both duplex and
single mode fiber optic converters are available:
Part Number
Duplex Fiber-Optic - 100Base-FX
AS4TEF1011-100
ST, 1300 nm multimode, 2 km (1.2 miles)*
AS4TEF10173-100
SC, 1300 nm multimode, 2 km (1.2 miles)*
AS4TEF1014-100
SC, 1310 nm single mode, 20 km (12.4 miles)*
AS4TEF1015-100
SC, 1310 nm single mode, 40 km (24.8 miles)*
AS4TEF1016-100
SC, 1310 nm single mode, 60 km (37.2 miles)*
AS4TEF1017-100
SC, 1550 nm single mode, 80 km (49.7 miles)*
AS4TEF1018-100
MT-RJ, 1300 nm multimode, 2 km (1.2 miles)*
Connector Type
Number
Description
RS-232
one (1)
6-pin, DIN serial, 3.2 m (10 ft.)*
T1/E1
four (4)
RJ-48
AS4TEF1029-10x
(single mode, single fiber models are listed on page 2)
