12
3. Using the teacher and student microphones
3.1 How to wear the microphones
Teacher’s microphone:
• Can be worn in the pocket/belt together with an external microphone.
• Can be fastened to the top/shirt with a clip (near the mouth).
• Can also be worn round the neck using a neck loop.
NOTE: Do not use the Teacher microphone without antenna/headset
since it will decrease battery time to around three hours.
3.2 Switching on the microphone/speaking
Teacher’s microphone:
Switch on:
Gently press the On/Off button.
Switch off:
Hold in the
On/Off button for about 1 second. The LED goes out.
NB! Check if the function Speech Key is Active (see section 2.4 E).
Student microphone:
Speak:
Hold in the On/Off button while speaking. The LED comes
on. One student can speak at a time.
Read-aloud function
(Speech key): Activated in programming mode
and means that the student microphone can be switched on without
holding in the On/Off button, e.g. when reading aloud. The button
is then used to switch the microphone on and off. The On/Off button
works as normal.
Built-in antenna:
The student microphone has a built-in antenna for
maximum comfort and user friendliness. If interference occurs with
the built-in antenna, this may be due to poor radio reception condi-
tions or the receiver sensitivity may be inadequate. To minimise this
interference, use the external wire antenna supplied.
Student microphone:
• Place it in the table stand for quick and easy access.
ENGLISH
