2
Battery Installation
The GST600 monitor requires 1(one) 9volt battery. The bat-
tery housing is found on the back of unit. Slide battery
cover off and insert only a 9volt battery.
Only new and valid batteries can be used.
The “Replace Battery” LED located on the front of unit in-
dicates when battery power is low. When the LED lights,
stop testing and replace with fully charged 9v battery.
Stationary Installation
The GTS600 has two options for installation: Stationary in-
stallation or Free-standing installation with optional foot-
plate and stand.
1. Remove all items from carton and confirm you have re-
ceived all items contained in the “Parts Included List.” lo-
cated on Page 8.
2. Choose a location in the work area that is easily accessi-
ble and safe for both test equipment and users.
The GST 600 can be mounted on to any flat, stationary sur-
face. Frequently, the unit is mounted on a table or wall
3.
WALL MOUNT:
Two keyhole slots on the back of the unit
allow you to attach the unit using two (2) screws. See
figure 1
.
4. Install two(2) screws 1 1/2” apart, leaving 1/4” of screw
head from mounting surface.
5. Mount the tester on the screws, pulling gently down to
lock into place.
