9 CONGLOMKB .COM
Please contact
or
1-877-333-0098
for further assistance .
ENGLISH
Installation (continued)
INSTALLING THE STRAINER
1 . Apply plumbing putty or silicone sealant to the top side of the
drain opening .
2 . Insert the strainer body into the drain opening and press it
down until it is evenly seated .
3 . Assemble the rubber gasket, friction washer and strainer
locknut onto the strainer body from underneath the sink .
Hand tighten the strainer locknut until it is snug .
Do not overtighten .
4 .
Insert the plastic flange into the flange-end of the tailpipe (not
supplied) then secure the tailpipe to the strainer body using
the connecting nut . Tighten the connecting nut until it is snug .
Do not overtighten .
5 . Remove excess sealant from around the drain opening .
NOTE:
The tail pipe is not supplied.
Strainer Body
Sealant
Sink
Rubber Gasket
Fiber Washer
Strainer Locknut
Plastic Flange
Tailpipe
Connecting Nut
Strainer Basket
