Transduction TR-LCD2300W-V2, User Manual

Page: 15 / 38

15 TR-LCD2300W-V2 User Manual
OSD Setup
General Description
The monitor features an on-chip OSD (On-Screen Display) controller that creates the
OSD user interface menus and overlays them onto the output data stream. User can
adjust the display conditions on LCD monitor using the touch pad. After powering on,
the controller restores itself to the last known conditions saved in Non-Volatile Random
Access Memory (NVRAM). All parameters (Settings) are saved whenever user selects
icon in OSD. Not making a selection within a defined time period causes the OSD menu
to close. The
DOWN
key is used to scroll through items within the main menu. The
selected item is highlighted. The
LEFT
and
RIGHT
keys are used to increase and
decrease the adjustment of the selected function. The
MENU
key is used to open and
close the OSD menu. The
MENU
key is defined as “CONFIRM” to activate the
highlighted item. The SOURCE key is used to select the video input source. The
SOURCE key is defined as “BACK” to go to previous sub-menu. The
POWER
key
enables user to turn ON/OFF the monitor.
Main Menu
Press
MENU
of OSD board to start Main Menu. There are seven major icons in the
Main menu: Brightness/Contrast, Color Settings, Input Source, Display Settings, Other
Settings, Information and Auto Adjust. Use the
DOWN
key to scroll through items. Press
MENU
key again to select item sub-menu. For example, when Brightness/Contrast is
highlighted, press
MENU
and then use the
DOWN
key to scroll the items. If sub-menu
item Brightness is highlighted, press
MENU
ton select and then
RIGHT
or
LEFT
to
adjust the brightness level. If setting is finished, press
SOURCE
to go back to
Brightness sub-menu and press
SOURCE
again to go back to Brightness/Contrast main
menu. New OSD parameters are saved in NVRAM.