Getting Help
Press F1 to pop up a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit
the Help Window press <Esc> or the F1 key again.
In Case of Problems
If, after making and saving system changes with Setup, you discover
that your computer no longer is able to boot, the AwardBIOS™
supports an override to the CMOS settings which resets your system to
its defaults.
The best advice is to only alter settings that you thoroughly understand.
To this end, we strongly recommend that you avoid making any
changes to the chipset defaults. These defaults have been carefully
chosen by both Award and TR-979 manufacturer to provide the
absolute maximum performance and reliability. Even a seemingly
small change to the chipset setup has the potential for causing you to
use the override.
50
TR-5001 User Manual
Summary of Contents for TR-5001
