Chapter 4 Installing the Encompass 4 Reader
TransCore Proprietary
4-47
5. Using the four screws and washers supplied with the wall-mount bracket, attach the factory-mounted
bracket to the wall mount bracket, lining up the four outside screw holes as shown in
.
6. Tighten lightly, since you will want to adjust the bracket later. This subassembly allows you to aim the
Encompass 4 Reader left or right when all three brackets are assembled.
7. Mount the pole-mount bracket to the wall, ceiling, or fixture using appropriate anchors as shown in
.
Figure 37 Factory-Mounted Bracket Attached to Wall Mount Bracket
Figure 38 Pole Mount Bracket Attached to Wall
Summary of Contents for encompass 4
Page 207: ......
