Transcend TS-AWE1, User Manual, Page: 42 / 65

38
BIOS SETUP
• •
• • •
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33(66) implementation is possible only if your IDE hard drive can support, and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If both your hard disk drive and your system software can support Ultra DMA/
33(66), select “Auto” to enable BIOS support.
• •
• • •
USB Controller
Select “Enabled” if your system contains a Universal Serial Bus (USB) controller and USB
peripheral(s).
• •
• • •
USB Keyboard Support
Select “Enabled” if you use a USB Keyboard.
•
Init Display First
This item allows you to decide whether to activate either the PCI Slot or the AGP first.
•
AC97 Audio / MODEM
If you select “Enabled”, BIOS will detect whether you are using any Audio / MODEM devices.
When an Audio / MODEM device is detected, the onboard Audio / MODEM controller will be
enabled. If you want to use your own Audio / MODEM card, set these fields to “Disabled”. If
not, set these fields “Enabled”.
• •
• • •
IDE HDD Block Mode
Block Mode is also called Block Transfer, Multiple Commands, or Multiple Sector Read /
Write. If your IDE hard drive supports Block Mode (most new drives do), select “Enabled” for
automatic detection of the optimal number of Block Read / Write per sector the drive can
support.
• •
• • •
Power On Function
- Password : Power On only if you key in correct password.
- Hot Key : You can use the hot key to Power On the system.
- Mouse Left : Power On with the Mouse Left Button.
- Mouse Right : Power On with the Mouse Right Button.