manualshive.com logo in svg

Transcend TS-ALR4, User Manual, Page: 52 / 56

Share
Download
Transcend TS-ALR4 User Manual Download Page 52

3.13 Set Password

This option allows you to set a password to prevent others from changing the BIOS setting of

your system.

The password prevents any unauthorized use of your computer. If you set a password, the

system prompts for the correct password before you boot or access “Setup”.

To set a password:

 1. At the prompt, type your password. Your password can be up to 8 alpha-numeric

      characters. When you type the characters, they appear as asterisks on the password

      screen box.

2. After typing the password, press the [Enter] key.

3. At the next prompt, re-type your password and press the [Enter] key again to confirm the

   new password. After password entry, the screen automatically reverts to the main

    screen.

To disable the password, press the [Enter] key when prompted to enter the password. The

screen displays a message confirming that the password has been disabled.

47

                         BIOS SETUP

Summary of Contents for TS-ALR4

























































Reviews:

No comments