13
V2.0
3.
Safety Precautions
General Use
During operation, avoid exposing your DVD writer to extreme temperatures above
40
℃
or below 5
℃
.
Never drop your DVD Writer.
Only use the DVD Writer face-up, on a stable flat surface
Do not allow your DVD Writer to come in contact with water or any other liquids.
Do not use a damp/wet cloth to wipe or clean the exterior case.
Never look directly into the laser lens, as it can be harmful to your eyes.
Do not attempt to open the outer case (doing so will void your product warranty).
Never touch the laser lens.
Writing Data
Do not touch, pick up, or move the DVD Writer during the write process. This can
damage the device and will cause errors on the disc being written.
Transcend does not take any responsibility for data loss or damage resulting
from use of this product.
If using this product to backup data, we strongly advise
using high-quality recordable media, and that you fully test and verify the contents
of all written discs. It is also a good idea to regularly backup important data to a
different computer or other storage medium.
To ensure High-Speed USB 2.0 data transfer rates when using your DVD Writer
with a computer, please check that the computer has the relevant USB drivers. If
you are unsure about how to check this, please consult the computer or
motherboard User’s Manual for USB driver information.
Only use the USB cable that came with the DVD Writer to connect it to a computer,
and always ensure that the cable is in good condition. NEVER use a cable that is
frayed or damaged.
Ensure nothing is resting on the USB cable and that the cable is not located
where it can be tripped over or stepped on.
