Chapter 3
•
Fitting Your Transcend
•
page 13
Transcend H
9
M Waterless Humidification System
1.
Once the Transcend H
9
M Waterless Humidification System has been
completely assembled (see Assembly section), place Transcend on the head
so that the rear head band fits at the nape of the neck.
2.
Fit the mask so the forehead pad rests just above the brow line.
3.
If the mask does not fit so the forehead pad rests just above the brow line,
change out the arm bar to the appropriate size. To change out the arm bar,
rotate it out of the forehead piece, then remove the arm bar from the mask
by pinching the sides to release it from the slide adjustment. Select another
size arm bar and fit it into the mask slide adjustment and forehead piece.
4.
Connect the bottom straps of the headgear to the interface by inserting the
ball clips into the notches on mask shell.
1
FIT
TIN
G
4
