18
Error Messages of Boot-Up Function
The initialization of the Boot-up Function or installation of the OS is probably incomplete.
Please make sure that the path
C:\WINDOWS\COMMAND\EBD
exists in Windows 98/98SE,
Me or XP. If yes, return to step 1 to re-initialize the Boot-up Function. If this fails, the Boot-up
Function does not support your computer.
The Write-Protect switch is set to Locked ( ). Please reset the Write-Protect switch to
Unlocked (
).
Recovery Function
If your
JetFlash
is ever damaged, you can use the
RecoverDisk
program to restore its
default settings.
Running the
RecoverDisk
program will erase all the data on JetFlash.
If there are bad blocks in the flash memory chip of
JetFlash
, the memory size of
JetFlash
after running the
RecoverDisk
program will be smaller than the original
memory size.
Skip steps 1-2 if the
U-Storage Tool
has already been installed.
1. Put the Driver CD into the CD-ROM drive (Auto-Run supported). Click the
U-Storage Tool
button.
