background image

 

 

3-in-1 Card Reader/Writer Limited Warranty 

“Above and beyond” is the standard we set ourselves for customer service at 
Transcend. We consistently position ourselves to be significantly above the 
industry norm.    It’s all part of our commitment to Customer Satisfaction. 

All Transcend Information, Inc. (Transcend) products are warranted and tested to be 
free from defects in material and workmanship and to conform to the published 
specifications. Should your Transcend 3-in-1 Card Reader/Writer malfunction during 
normal use in its recommended environment due to improper workmanship or 
materials within the warranty period, Transcend will repair or replace your product with 
a comparable product. This warranty is subject to the conditions and limitations set 
forth herein. 
Duration of Warranty:    The Transcend 3-in-1 Card Reader/Writer is covered by this 
warranty for a period of five (5) years from the date of purchase. Transcend will 
inspect the product and make the determination as to whether the product is eligible 
for repair or replacement. The decision by Transcend regarding eligibility of the 
product for repair or replacement will be final and binding. Transcend reserves the 
right to provide a functionally equivalent refurbished replacement product. 
Limitations:    This warranty does not apply to products that fail due to accident, abuse, 
mishandling, improper installation, alteration, acts of nature, improper usage, or 
problems with electrical power. The Transcend 3-in-1 Card Reader/Writer must be 
used with devices that conform to the recommended industry standards. Transcend 
will not be liable for damages resulting from a third party device that causes the 
Transcend product to fail. Transcend shall in no event be liable for any consequential, 
indirect, or incidental damages, lost profits, lost business investments, lost goodwill, or 
interference with business relationships as a result of lost data. Transcend is also not 
responsible for damage or failure of any third party equipment, even if Transcend has 
been advised of the possibility. This limitation does not apply to the extent that it is 
illegal or unenforceable under applicable law. 
Disclaimer:  The foregoing limited warranty is exclusive, with no other warranties, 
implied or statutory, including, but not limited to any implied warranty of 
merchantability or fitness for a particular purpose. This warranty is not affected in any 
p

art by Transcend providing technical support or advice. 

 

Transcend Information, Inc.

 

www.transcendusa.com 

 

 

The Transcend logo is a registered trademark of Transcend Information, Inc. 

*All logos and marks are trademarks of their respective companies. 

 

Summary of Contents for 3-in-1 Card Reader/Writer TS0MFLRD


















Reviews: