9
USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
ID Number Entry (A8)
1. While in the User Menu mode, scroll to "A 8", and then scroll down once using the ZERO key to
enter the ID Number menu.
2. The display will momentarily show "ID NO", followed by a value with one flashing digit. This
value will be the current ID number value.
3. Use the four directional keys (shown below) to adjust the displayed value to the actual ID
Number value. Increase the flashing digit by pressing the UNITS key. Decrease the flashing digit
by pressing the ZERO key. Pressing the PRINT key or the TARE key will change the position of
the flashing digit.
4. After setting the exact value, press the NET/GROSS key to save the ID Number value. The
display will show "SET" momentarily, and then revert back up to A8.
LF (Line Feeds) Number Entry (A9)
1.
While in the User Menu mode, scroll to "A 9", and then scroll down once using the ZERO key to
enter the Line Feeds menu.
2.
The display will momentarily show "LF", followed by the current line feeds value.
3.
Use the four directional to adjust the displayed value to the actual line feeds value. Increase the
flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the ZERO key.
Pressing the PRINT key or the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the line feeds value. The
display will show "SET" momentarily, and then revert back up to A9.
Set Time (A15)
Your indicator will keep track of the current time for you, which can then be printed on the print ticket.
Use this procedure to set the time, which must be entered in military (24-hr) format. For example, for
9:00 AM, you would enter 900. For 5:00 PM, you would enter 1700.
1.
While in the User Menu mode, scroll to "A 15", and then scroll down once using the ZERO key to
enter the set time menu.
2.
The display will momentarily show "ENT TI", followed by a value with one flashing digit. This
value will be the current time in military (24-hr) format.
3.
Use the four directional keys to adjust the displayed value to the actual time value. Increase the
flashing digit by pressing the UNITS key. Decrease the flashing digit by pressing the ZERO key.
Pressing the PRINT key or the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the time value. The display will
show "End TI" momentarily, and then revert back up to A15.
