Page 5-2
5.2
USER MENU PROCEDURES
This section provides instructions for all of the User Menu procedures.
5.2.1
ID Number Entry (A8)
1.
While in the User Menu mode, scroll to "
A 8
", then scroll down once using the
ZERO key to enter the ID Number menu.
2. The display will momentarily show "
ID NO
", followed by a value with one flashing
digit. This value will be the current ID number value.
3. Use the four directional keys (shown in Figure 5-1 below) to adjust the displayed
value to the actual ID Number value. Increase the flashing digit by pressing the
lb/kg key. Decrease the flashing digit by pressing the ZERO key. Pressing the
TARE key or the PRINT key will change the position of the flashing digit.
USER MODE KEY FUNCTIONS
ZERO
GROSS
NET
TARE
SET
lb/kg
Figure 5-1: User Menu Key Assignments
4. After setting the exact value, press the NET/GROSS key to save the ID Number
value. The display will show "
SET
" momentarily, then revert back up to A8.
5.2.2
LF (Line Feeds) Number Entry (A9)
1.
While in the User Menu mode, scroll to "
A 9
", then scroll down once using the
ZERO key to enter the Line Feeds menu.
2. The display will momentarily show "
LF
", followed by the current line feeds value.
3. Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual line feeds value. Increase the flashing digit by pressing the lb/kg
key. Decrease the flashing digit by pressing the ZERO key. Pressing the TARE key
or the PRINT key will change the position of the flashing digit.
4. After setting the exact value, press the NET/GROSS key to save the line feeds
value. The display will show "
SET
" momentarily, then revert back up to A9.
