4
IV. Preparing the scale for use
Refer to the following figure for the following instructions.
1.
Please place the scale on a steady table.
2.
Place the tray onto the scale and adjust the four feet until the scale does not rock
back and forth on the table. Be sure also that the leveling bubble is in the center.
3.
Recharge the battery by plugging the scale into a 120 VAC outlet. Continue
charging until the
symbol disappears.
4.
Make sure that nothing is on the tray when the scale is switched ON.
5.
When first switched ON, the scale will enter a self-check mode. During this mode
the display will count down from 999999 to 000000. Once complete, the scale is
ready for use.
