Thermocouple Calibrator
CheckMate™ 400
• Calibrate thermocouple
instruments
Check transmitter inputs
Simulate sensors into controllers and
indicators
Read thermocouple probes
• Four built-in T/C types
Types J, K, T, E and millivolt
Built-in cold junction compensation
• Compact and low cost
The CheckMate 400 fits easily into your
pocket and budget.
• Easy to use
One touch to set the output & function
• Accuracy to ±0.025%
Within ±1°C
• Long lasting alkaline batteries
Four “AA” Alkaline cells can provide months
of typical use
• Settable “Quik-Chek®”
pushbuttons
Set any HI and LO output in each range
Easy to use
The Transmation CheckMate 400 checks, calibrates and
measures all the thermocouple devices in your plant.
Toggle the display between °C and °F or lock it for full
time use of either temperature scale.
Simulate temperature and measure thermocouples
directly with the pocket sized CheckMate 400.
The CheckMate 400 is easy to use. Select a
thermocouple type and use the decade push-buttons for
the precise output you need.
Source thermocouple
Calibrate recorders, digital indicators, computer inputs or
any other instruments that measure thermocouples.
Easily set any value to 1° C or F with the intuitive UP
and DOWN pushbuttons. Separate buttons for each digit
make adjustments fast and easy.
Recall output settings
The “Quik-Chek” pushbuttons provide rapid checking of
any three points in each range. Quik-Chek settings
remain in memory even when the CheckMate 400 is
powered off.
Measure thermocouple probes
Verify proper sensor function and measure temperatures
by attaching a thermocouple to the CheckMate 400.
Toggle the display between °C and °F or configure it for
full time use of either temperature scale.
Display the present reading, maximum or minimum by
pressing the READ, MAX or MIN pushbuttons to quickly
check how much the temperature has varied or the
stability of control.
