Programming Codes
T480
Programmer’s Guide
Page
46
Rev A
100-14362
Character Pitch
Character pitch commands that set specific characters per inch (cpi) disable any right-
side spacing set by the [ESC] V <n> command. In addition, when font changes are
made, the character pitch is maintained.
[DC2]
Begin 10 cpi character pitch
ASCII
[DC2]
Hexadecimal
12H
Decimal
<18>
IPCL
&%F3
EPOS
[ESC][SP] <n>
Description
The [DC2] command sets 9.905 characters per inch print pitch.
[ESC] :
Begin 12 cpi character pitch
ASCII
[ESC] :
Hexadecimal
1BH 3AH
Decimal
<27> <58>
IPCL
&%F2
EPOS
[ESC] [SP] <n>
Description
The [ESC] : command sets 12.235 characters per inch print pitch.
[SI]
Begin 17 cpi character pitch
ASCII
[SI]
Hexadecimal
0FH
Decimal
<15>
IPCL
&%F1
EPOS
[ESC] [SP] <n>
Description
The [SI] command sets 17.333 characters per inch print pitch.
[ESC] [SI]
Begin 24 cpi character pitch
ASCII
[ESC] [SI]
Hexadecimal
1BH 0FH
Decimal
<27> <15>
IPCL
&%F4
EPOS
[ESC] [SP] <n>
Description
The [ESC] [SP] command sets 23.111 characters per inch print pitch.
